SHQ

Introducing the all new Cabrinha Nomad IDS freestyle wave kite from Cabrinha. This non-bow hybrid IDS kite combines the best of both worlds…a moderate C shaped arc and an IDS bridle to deliver Cabrinha's fastest turning kite yet.
 

Pre-order now limited stock available in first shipments due to strong demand !

The Cabrinha Nomad 2010 is not a bow kite, has a more closed arc than our other kites, and it utilizes an IDS bridle and the same control system as the other kites. The Nomad is a kite for an advanced rider looking for performance in freestyle and waves. The kites turns off the wingtip and generates a lot of pull in kite loops. The Cabrinha Nomad is ideal for anyone looking to do huge unhooked wakestyle tricks while still having the safety and depower of the IDS bridle and control system. In the surf, the kite sits back in the pocket and pivots nicely so that it's always in the right place. The Nomad absolutly floats as you rip down the line.

The Nomad has great depower and turns fast. The Nomad handles the task of unhooked riding by delivering a constant steady powerband. When unhooked the kite continues to fly forward, making the power predictable during your tricks. On the fly depower is extremely linear which means you’ll always have the correct amount of power for the job at hand.In general, the Nomad size for size generates about 1+m kite size less in low end than our other bow kites. The Cabrinha Nomad will be available in 4 different color schems : Black / Red , Orange / Black , White / Black / Green , Black / Green / Yellow / Purple / Blue

Nomad Sizes : 4m / 5.5m / 7m / 9m / 11m / 13m
Available Kite only or Complete with Cabrinha IDS bar and lines.
 

• HOT MELT LEADING EDGE CLOSURE
• IMPROVED LEADING EDGE REINFORCEMENT
• TRANSITIONAL STRUT REINFORCEMENTS
• FLAT SEAM PANEL Construction
• 70 GSM TRAILING EDGE MATERIAL
• TOUGHENED CANOPY MATERIAL
• FULL CONTACT STRUT CONNECTION
• REINFORCED STRUT TIPS
• TWO-PLY TRAILING EDGE
• IMPROVED BRIDLE LINES

This season we take durability head-on with the addition of transitional strut panel materials and reinforced LE closing seams. We have reinforced the high load areas of the Cabrinha Nomad with a transitionally weighted material. This well-placed material acts as a buffer zone between the rigid strut areas and the canopy. The entire canopy of all kites are flat seamed and taped prior to sewing. This is 20% stronger than the free hand sewn method of a top stitch.

The leading edge of the Cabrinha Nomad closing seams now impliments a hot melt glue tape in the leading edge closing seam for added strength. The entire trailing edge implements a two-ply of tough 70 gsm material for added durability and strength.

The full contact between the strut and the leading edge helps to ensure a rigid frame for the industry leading Cabrinha Nomad. The positive connection not only provides stability while the kite is in flight but delivers added durability and a rapid relaunch.

Improved bridle lines.
We use a corded bridle material for use in the sections that pass through the pulley.